Stainless steel Obelisk

Obelisk central frame, which will carry the mirror stanless and will look like the obelisk is floating off the ground once placed.

We then cut the main 4 sections from high grade maritime stainess steel 2mm sheets.

Once cut we mounted the sheets on 4 sideds with butt corners and tacked them together using a tig welding process, just melting the edges together no wire.

We then fabricated the top 4 triangle areas to fit and repeated the process.

Once we had tacked it altogether we melted the corners all down the seams to form the joint.

Once welded we cleaned with a very fine sanding disc and then orbital to allow us to polish back the areaas to a mirror finish.